SCO-5F Precision hot air oven

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000006

Product serial number

Category

Precision Hot Air Drying Oven

Quantity

-

+

Stock:

0



1

Description

1.Application

*Drying for chemical gas and food processing baked goods

*Drying for ink solidifying & curing

*Drying for painting film

*Drying for electronics and electrical products

*Drying for communication

*Drying for hardware, glass, plastic, resin

*Drying for Chinese herb, medicine, pharmaceutical

*Drying for aquatic products, agricultural products, evaporated vegetables

*Drying for raw material in the field of light industry

2.Power Consumption

Power Supply	AC(380±38)V 3φ 50HZ 7KVA
	Three-phase four-wire + protective ground wire
	The grounding resistance of the protective earth wire is less than 4Ω; TN-S power supply or TT power supply
	The user is required to configure an air or power switch with corresponding capacity for the equipment at the installation site, and this switch must be independent and dedicated to the use of this equipment

3.Specification parameter requirements

Model	SCO-5F
Power Supply	AC380V 3φ 50HZ 7KVA
Interior Size	W1300mm×D500mm×H800mm
External Size	W1480mm×D700mm×H1580mm, for reference
Interior Material	SUS430# stainless steel sheet, mirror surface
External Material	SUS41# sheet , baking after anti-rust treatment
Heat Insulating Material	advanced insulation cotton
Temp. Control Range	Max:100°C, normally used 80°C
Temp. Control Uniformity	±3%°C
Temp. Control Accuracy	±1°C
Max.Temp.Reaching Time	about 10min from RT to 80°C
Control System	XZ-960 temperature control system +PID automatic calculation, LED display, digital display
Heater	Stainless steel electricity heater
Heater Circuit Control	SSR control
Air Supply	Horizontal Forced Hot Air circulation
Air Supply Motor	long-axis motor, strong multi-wing fan
Safety Device	Over-temperature preventer Motor over-current protection Control circuit fuse Non-fuse switch etc
Warranty	1 Year
Installation	1-Flat ground, good ventilation 2-No strong vibration, no strong magnetic field around the machine 3-At least 600mm far away from the wall to install the machine 4-No inflammable, explosive, corrosive substance and dust around the machine 5-Check the power and voltage before starting the machine 6-The electric wires can be placed at the low temperature place 7-Stop the power and keet the clean after working
Use restrictions	This device prohibits: a Test and storage of samples of flammable, explosive and volatile substances b Test and storage of corrosive material samples c Test or storage of biological samples d Test and storage of strong electromagnetic emission source samples e Testing and storage of radioactive material samples f Test and storage of samples of highly toxic substances g Test and storage of samples that may produce highly toxic substances during testing or storage