新闻资讯
NEWS
SCO-12-16 Installation and commissioning of tunnel-type carbon cylinder oxidation furnace
SCO-12-16 tunnel-type carbon cylinder oxidation furnace, which is mainly used for heating and oxidation of aircraft engine cylinder block heat shield, was successfully installed and commissioned and delivered to Changsha customer in May 2023. • The machine adopts tunnel horizontal conveying layout, the box is divided into feeding area, hot air drying area, discharging area, length 18000mm.
2023-07-25
Views:
SCO-21L-2 chain reheating furnace
SCO-21L-2 chain shaped heating furnace, 1. Size of inlet and outlet of furnace body: W85mm* H205mm. 2. Heating section two-stage heating, temperature control and overtemperature control system two groups. 3. Double row extended pin chain + special tooling plate conveying, plus elastic tensioning device. The height of the upper surface from the ground: 998mm.
2023-07-25
Views:
HSCO-10-36 Guodian green hydrogen energy battery line
HSCO-10-36 Guoelectric green energy hydrogen energy battery line, used for fuel cell gas diffusion layer of microporous layer sintering at high temperature, 1100* 45,000 *800㎜ (width * length * height) divided into 9 sections splice, each section 5000mm,45 roller arch design (plant ceiling height 4.5 meters). It adopts the mode of air discharge under the carbon belt, the wind generated by the centrifugal wind wheel spreads from left to right, and the air suction in the middle.
2023-07-25
Views:
Zhuhai Gree Group leaders visit Hubei Xinhai industrial factory inspection
Zhuhai Group has cooperated with Xinzhou Industry for more than ten years, but this is the first time to visit Xinhai Industry factory audit. This time, there are two leaders of Xinhai Industry in Hubei Province, who mainly visited the first sheet metal, welding and spraying workshops, and the assembly, dust-free and testing workshops of the second part. They verified the equipment and qualification of the factory and put forward their own valuable opinions. We hope that the two companies will have more projects to strengthen cooperation in the later stage!
2023-08-23
Views:
VCO-45-32-3D vertical hot air circulation dryer
VCO-45-32-3D vertical hot air circulation dryer, the machine is automatic in and out of the material, the product through the furnace after 60 minutes into the next process. Internal size: L4260mm*W1080mm*H1720mm(the conveying circulation mechanism in the furnace is divided into about 4 parts, 13 layers each, each layer is 100mm, a total of 52 layers.) Max:120℃, the common temperature is 120℃, and it takes about 30 minutes for the normal temperature to rise to 120℃.
2023-07-25
Views:
CSAM-7-36 PCB automatic aging tunnel
CSAM-7-36 PCB automatic aging tunnel was successfully delivered to Changsha customer for automatic aging test of circuit board after R&D, production, assembly and debugging by Hubei Xinhai Industry; The equipment is mainly divided into body chamber, heating system, cache mechanism, feeding mechanism, conveying mechanism, feeding mechanism, discharging mechanism, control system, monitoring system, scanning code system and so on.
2023-07-25
Views:
Delco Germany (Industrial Drying Equipment)
As a professional manufacturer of automobile sensors, Delco Germany purchased 10 pieces of drying equipment from us in 2008 for electronic sensor epoxy resin curing. And the drying equipment are still in normal operation. This year, this client needed to move the plant. Because the drying equipment is rather large, this client invited us onsite for overseeing transferring and installation.
2023-06-17
Views:
Panasonic Japan (Industrial Tunnel Ovens)
Panasonic Japan needed to purchase 3 industrial tunnel ovens in November of 2011. This client inspected several industrial tunnel oven suppliers for 3 months. Panasonic Japan mainly looked for capacity of design, manufacturing, service and trust. After 5 times discussion with clients about the design plan, the client finally accepted the design plan we provided. In this design plan, we advised to adopt infrared and hot air-drying methods. Then, we signed the contract finally.
2023-06-17
Views:
Elco Group Italy (Drying Equipment)
Elco Group Italy is a company specializing in the manufacturing and supply of auto motors to BMW. Since September 2005, the color of the hot air oven used by Elco was turning yellow after drying. Besides, some of the products were not drying completely. To solve this problem, this client contacted a range of drying equipment suppliers and purchased some model machines, however, this problem was not solved completely.
2023-06-17
Views:
The second Guangzhou International Optical Lens, Camera Module and Acoustic Devices Exhibition -- Xinzhou and you are here to stay Exhibition Time: September 22-24, 2015 Exhibition Venue: Guangzhou Nanfeng International Convention and Exhibition Center Booth No. : A148 Exhibits: Conveying UV dryer, cabinet UV dryer, dust-free oven. We look forward to buyers from all walks of life, professional audiences, relevant units and new and old customers to participate in, sincerely invite you to visit, guidance! The heart of the boat with you.
2020-01-15
Views: