LSCO-5F high temperature aging test chamber
Suitable for electronic components, touch screen, camera module dispensing, post-printing curing and IC, IGBT and other semiconductor device packaging after baking.
High temperature aging test chamber
|Term order||category||The canonical case is clear|
|1||Scope of application||Suitable for electronic components, touch screen, camera module dispensing, post-printing curing and IC, IGBT and other semiconductor device packaging after baking.|
|2||Electric power||Total power of equipment||10KVA|
|Electric source||AC220V 1φ 50HZ|
|3||Equipment size||Internal dimension||Actual size|
|Outer dimension||W1080mm×D960mm×H1680mm（Machine reference size）|
|4||Equipment structure||1. Adopt single door design, the control box is located above the machine.
2. The nickel-chromium alloy ceramic heater is used to heat the circulating gas in the furnace and the indoor gas supplemented by the air intake, and then a certain amount of fresh gas and exhaust gas are added through the natural air exchange function of the furnace body to maintain the relative balance of the pressure inside and outside the furnace; When the gas temperature in the furnace reaches the set value, the heater will automatically stop heating. When the temperature in the furnace is lower than the set value, the heater will automatically start to maintain the temperature in the furnace.
3. Vertical, the fan is located at the top of the box, the right side of the air out and the left side of the return air.
4. Open a cable hole with a diameter of 80 mm on the left.
One 5.500*600 glass window.
|5||Materials and standards||1. The interior is made of SUS430# mirror stainless steel plate with concave iron reinforcement.
2. The exterior is made of SUS41# cold rolled steel plate. Antistatic powder baking paint, ivory white
3. Adopt advanced thermal insulation cotton, the thickness of insulation layer is 90 mm, plus heat insulation board.
4. The use of high temperature resistant silicone tight, temperature resistance ≥260℃.
5. Adopt long handle door lock, adjustable American rear twist.
|6||Temperature parameter||Temperature range||Normal temperature～250℃||Warming time||约40min||Overtemperature control||XZ-480 overtemperature protector|
|Controller temperature deviation||±1℃||uniformity||±2%℃||Controller accuracy||±0.1℃|
|Test method for uniformity||Nine points are distributed in the upper, middle and lower positions of the left and right sides of the oven. The probe is 100mm away from the inlet and outlet grille, and the temperature is constant for 30 minutes without load.|
|7||Temperature control system||1. Using CAHO-P961 multi-stage temperature controller, PID automatic calculation, LED display, SSR output, digital setting, electronic overtemperature protection. Taiwan "Minyang" temperature sensor.
2. Digital setting, cut-off temperature, constant temperature timing alarm, overtemperature alarm and other functions. One set of overtemperature alarms per box.
|8||Circulating air system||Single-side horizontal forced circulation air supply, special air path design, uniform heating temperature.
Adopt long shaft motor special for hot air oven.
Adopt strong type wind turbine.
|9||Safety function||1. Motor overcurrent protection, phase sequence protector, leakage protector, control line fuse, no fuse switch, contactor accessories are in line with national standards of the first class products. With upper temperature overheating alarm function, temperature time keeping function. 3. Constant temperature can be set. The motor will continue to supply air after the heating is disconnected.|
|10||Conformity standard||The People's Republic of China (GB/T10066-2004, JB20033-2004) and the Safety of electric heating devices (GB5959.1-2005)|
|11||Internal device||Black heat electric heater, the box is provided with three layers of rack, stainless steel grid plate 2 pieces.|
|12||External installation||1. Air inlet, air outlet, American rear button, long handle door buckle, install four handling wheels.
2, the exhaust port is located at the top of the box body, and the size of the hole opening can be adjusted.
|13||Equip with||1. A 3m long power cable is attached
2. Stainless steel grid plate 2 pieces.
|14||Guarantee||Free after - sales service for replacement and repair of faulty parts one year after delivery.|
Part of the material details
*Note: Please make sure that the information is filled in accurately and the communication is kept smooth. We will contact you as soon as possible