AC380V 3φ 50Hz 24kVA
W1930mm×D835mm×H1860mm (for reference only, customizing at your desire)
Standard temperature 60℃～200℃, Standard temperature～200℃ needs approximate 30 minutes (tested without loading)
Heat uniformity: ±2% (tested without loading), normally use 180℃
Heat uniformity: ±3℃ (tested with full load)
The cabinet is divided into two sections (left and right), each section has three layers. Bottom layer height: 60mm, each layer height: 380mm, load bearing: 150kG (total of 6 groups of W525*D503*H266mmpressing molds).
- Adopts 6 SMC pressure regulation valves (pressure release) with accuracy of 0.01kg/cm.
- Adopt double door design, divided into two chambers, three layer of each chamber
- Equipped with one UPS (uninterruptible power supply) power adaptor and one UPS power source for pressure protection during power supply fluctuation or disconnection.
- The air inlet is assembled with 10kg pressure gauge and one two-point combination pressure regulator.
- Equipped with six 2kg SMC pressure switch (alarm if pressure is less than the lower limit) to monitor the pressure adjustment status.
- Adopts 18 2-way flow control valves, 3 for each layer