SCO-5-1DW Drying Oven
Key Word:
conveyor tunnel dryer
tunnel drying oven
drying oven for laminated capacitors
Product Details
1- Application
The machine is dedicated for the quick drying process of laminated capacitors after the second cleaning.
2- Power Consumption
| Power Supply | AC(380±38)V 15KW (50±0.5)Hz |
| Three-phase four-wire + protective ground wire | |
| The grounding resistance of the protective earth wire is less than 4Ω; TN-S power supply or TT power supply | |
| The user is required to configure an air or power switch with corresponding capacity for the equipment at the installation site, and this switch must be independent and dedicated to the use of this equipment | |
| Power | Power 8KW in normal operation at constant temperature |
3- Specification parameter requirements
| Model | SCO-5-1DW |
| Power Supply | AC(380±38)V 15KW (50±0.5)Hz |
| Interior Size | W1300mm*L1257.3mm*H400mm |
| External Size | W1950mm*L3150mm*H2150mm, for reference |
| Interior Material | SUS304#1.0 mm stainless steel sheet, mirror surface |
| External Material | SS41#1.2 mm steel sheet, baking after anti-rust treatment |
| Heat Insulating Material | Advanced insulation cotton |
| Temp. Control Range | Max:100°C, normally used 60°C |
| Temp. Control Uniformity | ±5°C |
| Temp. Control Accuracy | ±0.3%FS |
| Max.Temp.Reaching Time | about 30min from RT to 70°C |
| Heater | Y type Nickel alloy ceramice electricity heater |
| Control System | 7 inch touch screen +PLC control system +PID automatic calculation, LED display, digital display |
| Heater Circuit Control | SSR control |
| Cleanliness Level | Air Intake with filter |
| Air Supply Mode | Vertical forced hot air circulation |
| Air Supply Motor | long-axis motor 1HP* 2sets |
| Conveyor Belt | Stainless steel chain with speed-regulating motor & inverter Heigth from ground to feeding area: 700±50mm |
| Safety Device | Over-temperature preventer Motor over-current protection Control circuit fuse Non-fuse switch Emergency stop switch etc. |
| Ambient Condition | Temperature: 5~35°C Relative Humidity ≤ 85%RH Air Pressure 86～106kpa |
| Warranty | 1 Year |
| Installation | 1-Flat ground, good ventilation 2-No strong vibration, no strong magnetic field around the machine 3-At least 600mm far away from the wall to install the machine 4-No inflammable, explosive, corrosive substance and dust around the machine 5-Check the power and voltage before starting the machine 6-The electric wires can be placed at the low temperature place 7-Stop the power and keet the clean after working |
| Use restrictions | This device prohibits: a Test and storage of samples of flammable, explosive and volatile substances b Test and storage of corrosive material samples c Test or storage of biological samples d Test and storage of strong electromagnetic emission source samples e Testing and storage of radioactive material samples f Test and storage of samples of highly toxic substances g Test and storage of samples that may produce highly toxic substances during testing or storage |
Previous:
Next:
Latest Products
*Note: Please make sure that the information is filled in accurately and the communication is kept smooth. We will contact you as soon as possible