LSCO-5F high temperature aging test drying oven
Key Word:
high temperature aging test drying oven
aging test drying oven
high temperature drying oven
high temperature aging oven
Product Details
1.Application
Used for Electronic components, touch screen, camera dispensing, printing curing and baking process of IC, IGBT semiconductor。
2.Power Consumption
| Power Supply | AC220V 1φ 50HZ 10KVA |
| Three-phase four-wire + protective ground wire | |
| The grounding resistance of the protective earth wire is less than 4Ω; TN-S power supply or TT power supply | |
| The user is required to configure an air or power switch with corresponding capacity for the equipment at the installation site, and this switch must be independent and dedicated to the use of this equipment |
3.Specification parameter requirements
| Model | LSCO-5F |
| Power Supply | AC220V 1φ 50HZ 10KVA |
| Interior Size | W800mm×D800mm×H1000mm |
| External Size | W1080mm×D960mm×H1680mm, for reference |
| Interior Material | SUS430# stainless steel sheet, mirror surface |
| External Material | SS41# steel sheet, baking after anti-rust treatment |
| Heat Insulating Material | Advanced insulation cotton |
| Temp. Control Range | Max: 300°C |
| Temp. Control Uniformity | ±2%°C |
| Temp. Control Accuracy | ±1°C |
| Max.Temp.Reaching Time | about 40min |
| Heater | Electricity heater |
| Control System | 7 inch touch screen +PID Temperature control module, TFT display, digital display Paperless recording function; Internet and remote monitoring |
| Air Supply Mode | Horizontal forced hot air circulation |
| Air Supply Motor | long-axis motor |
| Safety Device | Over-temperature preventer Motor over-current protection Control circuit fuse Non-fuse switch Earth leakage protection etc. |
| Installation | 1-Flat ground, good ventilation 2-No strong vibration, no strong magnetic field around the machine 3-At least 600mm far away from the wall to install the machine 4-No inflammable, explosive, corrosive substance and dust around the machine 5-Check the power and voltage before starting the machine 6-The electric wires can be placed at the low temperature place 7-Stop the power and keet the clean after working |
| Use restrictions | This device prohibits: a Test and storage of samples of flammable, explosive and volatile substances b Test and storage of corrosive material samples c Test or storage of biological samples d Test and storage of strong electromagnetic emission source samples e Testing and storage of radioactive material samples f Test and storage of samples of highly toxic substances g Test and storage of samples that may produce highly toxic substances during testing or storage |
Previous:
Next:
Latest Products
*Note: Please make sure that the information is filled in accurately and the communication is kept smooth. We will contact you as soon as possible