SCO-5-1 drying oven for solid-state and multilayer capacitors Drying furnace after secondary cleaning
Key Word:
drying oven for solid-state capacitors
drying machine for solid-state and multilayer capacitors
drying oven
Product Details
1. Application
Special equipment for solid-state and multilayer capacitors Drying furnace after secondary cleaning
2. Power Consumption
| Power Supply | AC(380±38)V 3φ 50HZ 10KVA |
| Three-phase four-wire + protective ground wire | |
| The grounding resistance of the protective earth wire is less than 4Ω; TN-S power supply or TT power supply | |
| The user is required to configure an air or power switch with corresponding capacity for the equipment at the installation site, and this switch must be independent and dedicated to the use of this equipment |
3.Specification parameter requirements
| Model | SCO-5-1 |
| Power Supply | AC380V 3φ 50HZ 10KVA |
| Interior Size | W750mm×L660mm×H600mm |
| External Size | W1015mm×L2000mm×H1950mm, for reference Feeding length 650mm, heating area lenth 660mm, discharging length 650mm |
| Interior Material | SUS430# stainless steel sheet, mirror surface |
| External Material | SS41# steel sheet, baking after anti-rust treatment |
| Heat Insulating Material | Advanced insulation cotton |
| Temp. Control Range | Max:200°C, normally used 150°C |
| Temp. Control Uniformity | ±2%°C |
| Temp. Control Accuracy | ±0.5%FS |
| Max.Temp.Reaching Time | about 25min from RT to 150°C |
| Heater | Electricity heater,irradiate heating length 400mm |
| Control System | touch screen +PLC control system +XZ-960 temperature control system +PID automatic calculation, LED display, digital display |
| Heater Circuit Control | SSR control |
| Air Supply Motor | long-axis motor 0.5HP* 1 set |
| Conveyor Belt | Conveyor width 500mm Stainless steel chain with 1HP speed-regulating motor & inverter Conveyor Speed:1~10m/min, adjustable Heigth from ground to feeding area: 600mm |
| Safety Device | Over-temperature preventer Motor over-current protection Control circuit fuse Non-fuse switch Emergency stop switch etc. Three color indicator (RED for fault, Yellow for Awaiting, Green for Working) |
| Ambient Condition | Temperature: 5~35°C Relative Humidity ≤ 85%RH Air Pressure 86～106kpa |
| Warranty | 1 Year |
| Installation | 1-Flat ground, good ventilation 2-No strong vibration, no strong magnetic field around the machine 3-At least 600mm far away from the wall to install the machine 4-No inflammable, explosive, corrosive substance and dust around the machine 5-Check the power and voltage before starting the machine 6-The electric wires can be placed at the low temperature place 7-Stop the power and keet the clean after working |
| Use restrictions | This device prohibits: a Test and storage of samples of flammable, explosive and volatile substances b Test and storage of corrosive material samples c Test or storage of biological samples d Test and storage of strong electromagnetic emission source samples e Testing and storage of radioactive material samples f Test and storage of samples of highly toxic substances g Test and storage of samples that may produce highly toxic substances during testing or storage |
4. Features
| Features | 1-Good heating rate, strong temperature stablility and uniformity |
| 2-Fully equipped with safety protection facilities and high safety performance | |
| 3-Multi-layer heat protection design, good sealing function, low temperature exterior surface | |
| 4-the internal of whole machine is sealed totally, exterior cabinet with cold-rooled steel plate, baking after anti-rust treatment, beautiful appearance. | |
| 5-high efficiency, energy saving | |
| 6-SSR control, small temperature volatidity | |
| 7- automatic temperature controller, convenient for installation and repairing | |
| 8-wide range of application for various kinds of products |
Next:
Latest Products
*Note: Please make sure that the information is filled in accurately and the communication is kept smooth. We will contact you as soon as possible