||AC380V 3φ 50HZ 30KVA
|W1420mm×L4350mm×200 four-stage heating,
||1. The length of the feeding platform in the feeding section: 450mm, and the length of the discharging section: 450mm.
2. Heating section length: 4350mm (four-section heating, each section is 1087.5mm long, four sets of temperature control and over-temperature control systems).
3. The stainless steel chain is equipped with a limit rod for conveying.
4. Conveying surface width: 700mm*2, height of inlet and outlet: 200mm.
||Temperature Control System:
||1. Normal temperature ~100℃, normal temperature -80℃, it takes about 15 minutes.
2. The temperature sensing probe is placed 100-140mm above the conveying net to directly monitor the surface temperature of the product with a temperature control accuracy of ±1℃;
3. The temperature uniformity of other areas in the furnace is ±3℃, except for the 600mm temperature buffer zone of the inlet and outlet.
4. 800mm into the material inlet is the preheating zone for temperature rise.
5. Adopt OMRON E5A temperature controller + Weilun touch screen + Mitsubishi PLC control mode, with SSR control, PID automatic calculation, LCD screen display. It is used to control heating, start, fan, conveying, over temperature.
||1. The inner box is made of SUS430# mirror stainless steel plate, and the outer box is made of SS41# cold-rolled steel plate after anti-rust treatment, anti-static powder baking paint, baking computer white.
2. The frame adopts 40*40*2T square through welding, forming and baking paint, and the sheet metal around the frame is closed and removable.
4. The pneumatic door lifts vertically.
||Air supply system:
||It adopts four-stage horizontal air supply, 4 sets of special long-axis motors for the oven, and multi-wing air wheels for air supply.
||Single-layer light wave heating device + hot air circulation, normal life ≥ 2 years, the height of the heating tube from the conveyor belt ≥ 250MM. It is required to be easy to disassemble and maintain
||1.2HP domestic brake motor, the speed is adjustable, the speed is controlled between 0.2m/min-1m/min; the conveyor belt needs to be stable in operation.
2. Power supply: 380VAC±5%, three-phase, 50HZ.
3. The control electric box is required to be installed under the conveyor belt.
4. The motor is equipped with protection circuits for phase loss, short circuit, overload, over temperature, etc.
5. Equipped with Taiwan Ener 2HP frequency converter.
6. Stepping, 290mm per step.
||Use 100K high-grade thermal insulation cotton, thermal insulation thickness 80mm. Air insulation layer 30, high temperature resistant silicone sealing strip.
||1. Over-temperature prevention alarm device.
2. Motor overload protection, control circuit fuse., phase sequence protection, leakage protection, control circuit protection
3. All electrical appliances and temperature control devices adopt Chint and Taiwan's first-class brands.
||1. The conveying direction faces the control panel, from left to right.
2. The control box is located on the side of the feed section of the machine.
3. The exhaust port is 90mm, with a leaf adjustment seat, and 2 Chinese manuals.
||After-sales service for free replacement of faulty parts within one year after delivery;
||1. Fast drying speed and uniform temperature.
2. SSR control, small temperature fluctuation buffer.
3. Clean design, suitable for use in dust-free workshops.
4. The safety protection facilities are fully equipped and the safety performance is high.
5. Multi-layer heat insulation design, good airtightness and low surface temperature.
6. The frame is formed by square-through welding, and the interior of the sheet metal is reinforced by trough iron, making the whole machine strong and sturdy.
7. Stable conveying and effective anti-deflection.
8. The inside of the whole machine is made of mirror stainless steel plate and sealed by argon arc welding, with beautiful appearance.
9. Energy saving and consumption reduction, the output power after constant temperature is 1/3 of the power of the whole machine