Product Details
| No | Items | Parameters |
| 1 | power supply | C380V 3φ 50HZ 18KVA |
| 2 | Inner dimension | W600mm×L3100mm×H150mm |
| 3 | External dimensions | W1030mm×L4000mm×H1380mm（for reference） |
| 4 | Machine size | Feeding section length: 500mm, heating section length: 3100 mm (divided into 2 heating sections, including preheating section 500 mm, heating section 1600 mm, cooling section 1000 mm. Temperature control 2 groups. 2 in each group, one of which is Over-temperature protection, 4 in total.), 400mm discharge section. Conveying net width: 600 mm, entrance and exit height: 100 mm |
| 5 | Temperature Control System | 1. Temperature range: room temperature~200℃, room temperature~180℃, it takes about 25 minutes. 2. Thermostat: adopt XZ-960 type thermostat, digital setting, with Taiwan SSR control, PID automatic calculation, LED display. 3. The temperature control accuracy of the thermostat is ±0.5%FS; the temperature control uniformity is ±2% (empty furnace test) |
| 6 | Machine structure | 1. Inner and outer chamber material: the inner chamber is made of SUS430# mirror stainless steel plate, and the outer chamber is made of SS41# cold-rolled steel plate after anti-rust treatment and anti-static powder paint. 2. The frame adopts 40*40*1.5T square-through welding forming and baking paint, and the sheet metal around the frame is closed and detachable. 3. Using 120K high-grade thermal insulation cotton, thermal insulation thickness 80mm, air layer thermal insulation, high temperature resistant silicone sealing strip, maximum temperature resistance of 260 ℃. 4. The heating section has a lift-off design with movable support rods, which is convenient for inspection and maintenance. |
| 7 | Air supply system | Use long-shaft Taiwan "Qunli" motor for oven, with multi-wing air wheel for air supply, 1/2HP*3 units |
| 8 | Heater | Adopt black heat heater, effective heating length 700mm, power 6KW/piece, total 2 pieces. One of the preheating section is 8KW. |
| 9 | Conveyor system | It adopts 1HP powerful motor, matched with 1:900 gear reducer, Taiwan "Yineng" 1HP frequency converter for speed regulation, speed is 0.05~1m/min. Stainless steel afterburning bone conveyor network. |
| 10 | Safety protection system | 1. Over-temperature prevention alarm device 2. Emergency shutdown device for conveyor system failure. 3. Motor overload protection, electric heating overcurrent protection, phase sequence dislocation protection, leakage protection, control circuit and overload protection. 4. Signal indicator (red fault indicator, yellow standby indicator, green running indicator) |
| 11 | Equipped | 1. The conveying direction faces the control panel, from left to right. 2. Exhaust port ￠100mm, with a leaf adjustment seat, and equipped with a primary filter, the exhaust volume is 6CMM 3. Two copies of Chinese manual and several consumable parts. |
| 12 | Warranty | one year. |
| 13 | Features | 1. Fast drying speed and uniform temperature. 2. SSR control, small temperature fluctuation buffer. 3. Clean design, suitable for use in dust-free workshops. 4. The safety protection facilities are fully equipped and the safety performance is high. 5. Multi-layer heat insulation design, good airtightness and low surface temperature. 6. The frame is formed by square-through welding, and the interior of the sheet metal is reinforced by trough iron, making the whole machine strong and sturdy. 7. Stable conveying and effective anti-deflection. 8. The inside of the whole machine is made of mirror stainless steel plate and sealed by argon arc welding. The cold-rolled steel plate of the outer box is anti-rust treated and anti-static powder paint. The side of the frame is sealed with a beautiful appearance. 9. Energy saving and consumption reduction, the output power after constant temperature is 1/4 of the power of the whole machine. |
Previous:
Latest Products
*Note: Please make sure that the information is filled in accurately and the communication is kept smooth. We will contact you as soon as possible