中文  |  EN

产品中心

PRODUCTS

/
/
/
/
SCO-4FB dedicated oven for solid-state and multilayer capacitors Polymerization oven
Number of views:
1000042

SCO-4FB dedicated oven for solid-state and multilayer capacitors Polymerization oven

Retail price
0.0
Market price
0.0
Number of views:
1000042
Product serial number
Quantity
-
+
Stock:
0
1
Description

1. Application

Dedicated oven for solid-state capacitor process

2.Power Consumption

Power Supply AC(380±38)V  6KVA (50±0.5)Hz  
Three-phase four-wire + protective ground wire
The grounding resistance of the protective earth wire is less than 4Ω; TN-S power supply or TT power supply
The user is required to configure an air or power switch with corresponding capacity for the equipment at the installation site, and this switch must be independent and dedicated to the use of this equipment
Power Power 2KW in normal operation at constant temperature

 

3. Specification parameter requirements

Model SCO-4FB
Power Supply AC(380±38)V  6KVA (50±0.5)Hz  
Interior Size W700mm*D600mm*H1000mm
External Size W1100mm*D750mm*H1780mm
Interior Material SUS430# stainless steel sheet, mirror surface
External Material SS41# steel sheet, baking after anti-rust treatment
Heat Insulating Material Advanced insulation cotton
Temp. Control Range Max:200°C, normally used 40/50/70/110/150°C
Temp. Control Uniformity ±5°C
Temp. Control Accuracy ±0.3%FS
Max.Temp.Reaching Time about 60min from RT to 200°C
Heater Nickel alloy ceramice electricity heater / Stainless steel heater
Control System multi-stage temperature controller +SSR +PID automatic calculation + LED digital display + temperature sensor
Air Supply Mode Vertical forced hot air circulation
Air Supply Motor long-axis motor 1/2HP* 2sets
Safety Device Over-temperature preventer
Motor over-current protection
Control circuit fuse
Non-fuse switch
Emergency stop switch etc.
Ambient Condition  Temperature: 5~35°C
Relative Humidity ≤  85%RH
Air Pressure 86~106kpa
Warranty 1 Year
Installation 1-Flat ground, good ventilation
2-No strong vibration, no strong magnetic field around the machine
3-At least 600mm far away from the wall to install the machine
4-No inflammable, explosive, corrosive substance and dust around the machine
5-Check the power and voltage before starting the machine
6-The electric wires can be placed at the low temperature place
7-Stop the power and keet the clean after working
Use restrictions This device prohibits:
a Test and storage of samples of flammable, explosive and volatile substances
b Test and storage of corrosive material samples
c Test or storage of biological samples
d Test and storage of strong electromagnetic emission source samples
e Testing and storage of radioactive material samples
f Test and storage of samples of highly toxic substances
g Test and storage of samples that may produce highly toxic substances during testing or storage
Keyword:
Polymerization oven
industrial drying oven
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Copyright 2020 © Dongguan Xinzhou Industrial Equipment Co., Ltd    粤ICP备11103208号    Powered by www.300.cn 

Copyright 2020 © Dongguan Xinzhou Industrial Equipment Co., Ltd

 粤ICP备11103208号    Powered by www.300.cn