SCO-3FB Capacitor polymerization oven

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000040

Product serial number

Category

Dedicated Oven for Capacitor

Quantity

-

+

Stock:

0



1

Description

1. Application

Dedicated oven for solid-state capacitro process

2.Power Consumption

Power Supply	AC(380±38)V 15KW (50±0.5)Hz
	Three-phase four-wire + protective ground wire
	The grounding resistance of the protective earth wire is less than 4Ω; TN-S power supply or TT power supply
	The user is required to configure an air or power switch with corresponding capacity for the equipment at the installation site, and this switch must be independent and dedicated to the use of this equipment
Power	Power 2KW in normal operation at constant temperature

3.Specification parameter requirements

Model	SCO-3FB
Power Supply	AC(380±38)V 6KVA (50±0.5)Hz
Interior Size	W650mmD650mmH650mm
External Size	W1080mmD790mmH1380mm
Interior Material	SUS430# stainless steel sheet, mirror surface
External Material	SS41# steel sheet, baking after anti-rust treatment
Heat Insulating Material	Advanced insulation cotton
Temp. Control Range	Max:250°C, normally used 40/50/70/110/150°C
Temp. Control Uniformity	±5°C
Temp. Control Accuracy	±0.3%FS
Max.Temp.Reaching Time	about 40min from RT to 250°C
Heater	Y type Nickel alloy ceramice electricity heater / Stainless steel heater
Control System	multi-stage temperature controller +SSR +PID automatic calculation, LED digital display
Air Supply Mode	Vertical forced hot air circulation
Air Supply Motor	long-axis motor 1HP* 1set
Safety Device	Over-temperature preventer Motor over-current protection Control circuit fuse Non-fuse switch Emergency stop switch etc.
Ambient Condition	Temperature: 5~35°C Relative Humidity ≤ 85%RH Air Pressure 86～106kpa
Warranty	1 Year
Installation	1-Flat ground, good ventilation 2-No strong vibration, no strong magnetic field around the machine 3-At least 600mm far away from the wall to install the machine 4-No inflammable, explosive, corrosive substance and dust around the machine 5-Check the power and voltage before starting the machine 6-The electric wires can be placed at the low temperature place 7-Stop the power and keet the clean after working
Use restrictions	This device prohibits: a Test and storage of samples of flammable, explosive and volatile substances b Test and storage of corrosive material samples c Test or storage of biological samples d Test and storage of strong electromagnetic emission source samples e Testing and storage of radioactive material samples f Test and storage of samples of highly toxic substances g Test and storage of samples that may produce highly toxic substances during testing or storage