SCO-IR-6-2 Tunnel type hot air IR dryer
Key Word:
Conveyor Tunnel Hot Air infrared IR drying machine
Tunnel Hot Air infrared IR oven
Product Details
1. Power Consumption
| Power Supply | AC380V 3φ 50HZ 32KVA |
| Three-phase four-wire + protective ground wire | |
| The grounding resistance of the protective earth wire is less than 4Ω; TN-S power supply or TT power supply | |
| The user is required to configure an air or power switch with corresponding capacity for the equipment at the installation site, and this switch must be independent and dedicated to the use of this equipment |
2. Specification parameter requirements
| Model | SCO-IR-6-2 |
| Power Supply | AC380V 3φ 50HZ 32KVA |
| Interior Size | W700mm×L4000mm×H100mm |
| External Size | W1000mm×L4500mm×H1200mm Feeding area length 250mm, heating area length 4000mm, discharging area length 250mm |
| Interior Material | SUS430# stainless steel sheet, mirror surface |
| External Material | SS41# steel sheet, baking after anti-rust treatment |
| Heat Insulating Material | Advanced insulation cotton |
| Temp. Control Range | Max: 200°C, normally used 150°C |
| Temp. Control Uniformity | ±2%°C |
| Temp. Control Accuracy | ±1°C |
| Max.Temp.Reaching Time | about 25 min from RT to 150°C |
| Heater | Far infrared radiation heater |
| Control System | temperature controller +SSR +PID automatic calculation, LED display, digital display |
| Air Supply Mode | Forced hot air circulation |
| Air Supply Motor | long-axis motor with multi-wing fan |
| Conveyor Belt | 4*4 Teflon Wire mesh, conveyor belt width 600mm Heigth from ground to feeding area: 100mm |
| Safety Device | Over-temperature preventer Motor over-current protection Control circuit fuse Non-fuse switch Emergency stop switch etc. |
| Warranty | 1 Year |
| Installation | 1-Flat ground, good ventilation 2-No strong vibration, no strong magnetic field around the machine 3-At least 600mm far away from the wall to install the machine 4-No inflammable, explosive, corrosive substance and dust around the machine 5-Check the power and voltage before starting the machine 6-The electric wires can be placed at the low temperature place 7-Stop the power and keet the clean after working |
| Use restrictions | This device prohibits: a Test and storage of samples of flammable, explosive and volatile substances b Test and storage of corrosive material samples c Test or storage of biological samples d Test and storage of strong electromagnetic emission source samples e Testing and storage of radioactive material samples f Test and storage of samples of highly toxic substances g Test and storage of samples that may produce highly toxic substances during testing or storage |
Previous:
Latest Products
*Note: Please make sure that the information is filled in accurately and the communication is kept smooth. We will contact you as soon as possible